The "seamless" secret of steel structure houses: professional handling of panel overlaps to eliminate leaks and hidden dangers.

---

In the world of steel structure buildings, the roofing system serves as the "skin" of the building, directly facing the erosion of wind and rain as well as the harsh exposure of the sun. Sheets of color-coated steel, sandwich panels, and insulated panels make up this sturdy protective shell. However, many owners encounter issues such as leaks, drafts, and decreased insulation performance after project completion, and the root cause often lies not in the materials themselves, but in a seemingly trivial yet crucial detail—The lap treatment of the panel.

As a professional steel structure company integrating design, production, processing, and installation, we deeply understand:"The devil is in the details." Perfect joints are the lifeline that ensures the long-term safety and watertightness of steel-structured houses.

Why is the panel overlap so critical?

The lap joints of the panels are the weakest point of the roof. If not handled properly, it can lead to a series of problems:

• Rainwater leakage:This is the most common problem; wind and rain can seep through the joints, damaging indoor equipment and decoration.
• Thermal bridge effect:Loose joints can create heat exchange channels, leading to significant loss of air conditioning in summer and heating in winter, thereby increasing energy consumption.
• Wind damage:In strong wind areas, inadequately overlapping panels can easily be lifted by the wind, causing significant damage.
• Dust and pests:Small gaps can become passages for dust and insects, impacting the indoor environment.

Our professional splicing treatment solution: meticulous craftsmanship, forging perfection.

For different products and building sections, we have a set of scientific and rigorous overlap treatment methods to ensure that every connection is "seamless."

1. Horizontal overlap: The art of flowing downstream.

Lateral overlapping refers to the overlapping of panels in the vertical direction along the slope of the roof.

• Standard requirements:We determine the overlap length strictly based on the roof slope and local rainfall intensity. Generally, the smaller the slope, the longer the overlap length (usually no less than 250mm).
• Sealing treatment:At the joint, we useDedicated waterproof sealantBefore the upper and lower panels are bonded together, we will continuously and evenly apply sealant along the overlapping edges of the lower panel to form the first line of elastic sealing defense.
• Fixed skills:The fixed screws must be driven into the crest position of the overlap and matched withHigh-quality EPDM waterproof gasket"Our"Steel structure accessories——Specialized self-tapping bolts can ensure uniform fastening force without damaging the sheet material, and the washers perfectly seal the nail holes under pressure.

2. Vertical overlap: A process with tight fit.

Vertical overlap refers to the horizontal left and right splicing of the panel material.

• Precise alignment:We use professional installation tools to ensure that the ribs of the two panels fit together precisely and tightly.
• Sealed lock edges:For color-coated steel plates and sandwich panels, we use specialized locking tools for mechanical seam locking. For certain panel types, a pre-placement may also be done within the overlapping seam.Sealing stripAchieve dual sealing of physics and chemistry.
• Accessory assistance:At critical positions, we will use our matching ones.Connecting beamThe components provide stable support for the panel, ensuring the flatness and strength of the longitudinal lap joint.

3. Enhanced processing of special nodes

The weak points of the roof are far more than just the planar seams; they are more about the details of the joints.

• Gutter connection point:Roof panel andGutterThe junction is a crucial point for waterproofing. We use extended overlaps, highly weather-resistant sealants, and specialized edging components to ensure that rainwater flows smoothly into the gutter without any leaks.
• Ridge and Eaves:We offer customization.Ridge cover and eaves edging.Through scientific matching design and sealing treatment, it ensures ventilation while effectively preventing rainwater and wind from backflow.
• Light well and fan inlet:Around these irregular structures, we use on-site measurements and customized cutting of panels, and employ high-performance sealing materials for comprehensive wrapping treatment.

Choosing us means choosing peace of mind and professionalism.

We are not just a panel supplier, but also your "general practitioner" for steel structure buildings. FromDesign phaseJust fully consider the lap joint plan, toProduction processPrecise control of the board size, then toInstallation PhaseExecuted by an experienced team with standardized construction, ultimately providing.Complete steel structure fittingsWe provide you with one-stop solutions.

---

Related recommendations

---